Log and Display Isotech Indicators and Baths

Included with Isotech Equipment

• I-cal the affordable automatic calibration system
  
• Expandable
  
• Calibrate RTD's and thermocouples

Purpose
I-cal is a new software application designed for automatic temperature calibration using Isotech products. It is affordable, easy to use and modular. In the simplest form it can be used with a SITE Dry Block Calibrator to automatically calibrate a single sensor against the block temperature. To calibrate multiple sensors simply add an Isotech Selector Switch - there are two models; one for up to eight resistance thermometers and one for up to eight thermocouples. You can have a total of two boxes, any combination, to calibrate up to 16 sensors! I-cal also supports the TTI-5 and TTI-6 indicators and with these you can easily build an automatic calibration system to calibrate up to 16 sensors on the TTI's channel B, with a standard probe on channel A. The calibration results are saved to a text file that can be opened in your preferred application to create a certificate or report.

I-cal CAPTURE is suitable for the automatic calibration of hand-held thermometers and similar devices. Previously hand-helds could not be easily calibrated automatically because most models do not have provision for a connection to a PC. I-cal CAPTURE solves this by using a low cost camera. I-cal, as usual, monitors the dry block bath / standard for stability, it then grabs an image before setting the bath to the next temperature. The image is captured with the date and time to make a complete visual record (as shown).

A caption is added showing dates,
time and the standard temperature.
Click the Picture to see full size

• Desktop or Notepad PC
• 166Mhz Pentium Processor with mmx or greater
• 32Mb Ram (I-Cal Capture 64Mb Ram)
• 800 x 600 / 16 bit display