This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
DESCRIPTION
The Isothermal range of Thermocouple Standards are the result of many years development. The type R and S standards will cover the range from 0°C to 1600°C.
The measuring assembly comprises a 7mm x 300mm or 600mm gas tight 99.7% recrystallised alumina sheath inside which is a 2.5mm diameter twin bore tube holding the thermocouple.
The inner 2.5mm assembly is removable since some calibration laboratories will only accept fine bore tubed thermocouples and some applications require fine bore tubing.
The covered noble metal thermocouple wire connects the measuring sheath to the reference sheath which is a 4.5mm x 250mm stainless steel sheath suitable for referencing in a 0°C reference system. Two thermo electrically free multistrand copper wires (teflon coated) connect the thermocouple to the voltage measuring device.
The thermocouple material is continuous from the hot or measuring junction to the cold, or referencing junction.
SPECIFICATION
| Technical Feature | Value |
|---|---|
| Model | 1600 |
| Hot Sheath Temperature Range | 0°C to 1600°C (R or S) |
| Emf vs Temperature | According to relevant documents |
| Response Time | 5 minutes |
| Hot Junction Dimensions | See diagram |
| Immersion | 100mm min |
| Case Dimensions | Height 65mm, Width 710mm, Depth 165mm, Gross Weight 900g |
| Feature | Removeable inner assembly |
| Feature | The standard thermocouple described can only be supplied in the following noble metal combinations: |
| “ | Type R: Platinum vs Platinum 13% Rhodium, Type S: Platinum vs Platinum 10% Rhodium |
| How to order | Model 1600 Type R/300, Model 1600 Type R/600, Model 1600 Type S/300, Model 1600 Type S/600 |
DOWNLOADS
Standard Thermocouple Model 1600 NCJ
Platinum Thermocouple, 0°C to 1600°C
The Isothermal range of Thermocouple Standards are the result of many years development. The type R and S standards will cover the range from 0°C to 1600°C.
- Type R and Type S
- Gas Tight Assembly
- Premium Grade Wire
We are online and ready to chat to you if you need any advice and support, or if you prefer you can fill out the form below.
Or call +44 01704 543830
Related products
-
Read moreParallel Tube Liquid Bath Libra Model 785
Best performance, -80°C to 300°C
Isotech calibration baths employ sophisticated designs to ensure calibration to the smallest of uncertainties.
-
Read moreCryostat Model 459
-80°C to -180°C
A Cryostat to calibrate thermometers over the range -80°C to -180°C, It requires the use of liquid nitrogen.
-
Read moreStirred Ice Bath Model 813
Simple Stirred Ice/Water Bath, 0°C
The most used temperature for calibration is 0°C.
-
Read moreOrion Model 796
-80°C to 300°C, 470mm Immersion.
The Isotech Hydra range of calibration baths have proved very successful since their introduction in 2003. These deep stirred liquid baths are suitable for the low uncertainty calibration of long thermometers including liquid in glass and extended length SPRTS.
