This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
DESCRIPTION
The Isotech Small Hotplate is a lightweight portable calibration system purpose designed for surface mounted sensors. The flat surface plate is made from precision-machined aluminum. The sensor to be tested is simply placed on the surface, for higher accuracy a calibrated surface sensor can be placed alongside and the two compared.
Good thermal contact is ensured by the flat disk that is recessed to allow the optional use of a heat transfer paste or fluid. Uniform heat distribution is achieved with a flat spiral heater clamped to an integrating block below the surface of the plate. The typical accuracy that can be achieved 1°C but this will be influenced by the type of sensor to be calibrated.
The internal control sensor is located immediately below the plate’s surface.
A protective cover that can fit over the block is included along with a comprehensive handbook.
The temperature range is from 35°C to 350°C, which is set by an advanced, but easy to use temperature controller.
The controller has 0.01 resolution below 100°C (0.1° above 100°). A PC interface is included as standard along with an RS232 converter lead and Windows software.
SPECIFICATION
| Technical Feature | Value |
|---|---|
| Model | 983 Small Hot Plate |
| Temperature Range | 35°C to 350°C |
| Stabilisation Time | 10 minutes |
| Cools from | 350°C to 100°C in 125 minutes |
| Heats from | 50°C to 350°C in 20 minutes |
| Uncertainties | Dependent on sensors and method of use 1°C typical |
| Calibration Volume | Flat Plate 71mm diameter |
| Display Resolution | 0.01 to 99.99, 0.1 100 to 350.0 PC can display 0.01 across whole range with the software included |
| Units | °C, °F, K |
| Power | 100 to 115V (50/60Hz) or 200 to 230V (50/60 Hz) 200 Watts |
| Dimensions | Height 115mm Width 230mm Depth 225mm |
| Weight | 3.9kg |
| How to order | 983 Small Hot Plate: Please specify voltage required. |
DOWNLOADS
Small Hot Plate Model 983
Surface Sensor Calibrator, 35°C to 350°C.
The Isotech Small Hotplate is a lightweight portable calibration system purpose designed for surface mounted sensors.
- Low Cost Portable Hot Plate
- PC Interface and Software
- Stable to ± 0.1°C
We are online and ready to chat to you if you need any advice and support, or if you prefer you can fill out the form below.
Or call +44 01704 543830
Related products
-
Read moreModel 944
30°C to 350°C
The fundamental problem with surface temperature measurement is that it is subject to large stem conduction errors, also because heat conducted from the surface of the hot-plate causes a localised cold spot to be created which means that the temperature indicated by the hot plate is not necessarily the temperature at the point of measurement.
